Ammco 2760, 2760-50, Inch & Metric Rotor Micrometers Bedienungsanleitung PDF herunterladen

Inch & Metric Rotor Micrometers

Operating Instructions with Parts

Identiﬁcation

No. 902760

No. 902760-50

Item Part No. Qty. Description

1 924999 1 Frame/Anvil Assembly

2 900205 1 Cap Screw

3 922402 1 Inch Spindle

922407 1 Millimeter Spindle

4 922396 1 Inch Barrel

922405 1 Millimeter Barrel

5 922397 1 Inch Thimble

922406 1 Millimeter Thimble

6 906148 1 Set Screw

7 922404 2 Spring

8 920379 2 Detent Ball

9 922403 1 Friction Strip

10 922398 1 Friction Thimble

Rotor Condition

Measure the rotor’s thickness at three (3) or more

points around its circumference about one (1) inch (2.54

cm) in from the outer edge. Note: If the rotor has

grooves worn in its friction surfaces measure its thick-

ness with the point of the anvil in the deepest groove. If

the rotor thickness varies between readings the rotor

should be machined. The rotor should be replaced if the

rotor’s thickness at any point is less than the minimum

established by the vehicle manufacturer, or if it will be

less after reconditioning.

Calibration

1. Loosen the cap screw holding the micrometer

assembly in the frame.

2. Zero the thimble to the zero mark of the barrel by

turning the friction thimble.

3. Push the thimble/barrel “assembly” against the

anvil.

4. Tighten the clamp screw while maintaining the set-

ting.

5. Check the zero setting by backing the spindle away

from the anvil and closing the micrometer by its friction

thimble.

6. If the micrometer does not read zero, loosen the

cap screw and reset the thimble to the same number of

divisions on the other side of the zero mark on the thim-

ble. Repeat steps 3, 4, and 5.

AMMCO, Inc. • Hennessy Industries • 1601 J.P. Hennessy Drive, LaVergne, TN 37086-3565

(800) 688-6359 • (615) 641-7533 • (615) 641-5104 FAX • www.ammcoats.com

1 2

Inhaltsverzeichnis

Seite 1 - No. 902760-50

Inch & Metric Rotor MicrometersOperating Instructions with PartsIdentiﬁcationNo. 902760No. 902760-50Item Part No. Qty. Description1 924999 1 Frame

Seite 2

Kommentare zu diesen Handbüchern

Keine Kommentare

Ammco 2760, 2760-50, Inch & Metric Rotor Micrometers Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Ausrüstung Ammco 2760, 2760-50, Inch & Metric Rotor Micrometers herunter. AMMCO 2760, 2760-50, Inch & Metric Rotor Micrometers User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Ammco 2760, 2760-50, Inch & Metric Rotor Micrometers